CPS-3010 0-30V 0-10A Switched Mode DC Power Supply

CPS-3010  0-30V 0-10A Switched Mode DC Power Supply

Voltage: 

0-30V

Current: 

0-10A

Power: 

300W

Features

  • Top performance cost ratio
  • High power density, smallest and compact
  • Aluminum shell, lower EMI
  • The microprocessor(MCU) control
  • Using Encoder to set the voltage and current
  • Four digital current meter and three digital volt meter
  • Soft start without overshooting
  • High efficiency, up to 88%
  • Low Ripple & Noise
  • Output ON/OFF
  • LOCK switch
  • Intelligent protection: Tracking OVP, Tracking OCP, OTP, Output short circuit protection

 

Specification

Operation Voltage Range       198 – 264Vac
Operation Frequency Range     45 – 65HZ
Output Voltage Range          0 – 32V
Output Current Range          0 – 10A
Efficiency (220Vac/full load)      ≥88%
Full Load Input Current(220Vac)    ≤2.3A
No Load Input Current(220Vac)      ≤120mA
Volt Meter Accuracy                ≤ 0.3% + 1 digits
Current Meter Accuracy             ≤ 0.3% + 3 digit

Constant Voltage

Load Regulation (0-100%)           ≤ 30mV
Line Regulation(198-264Vac)        ≤ 10mV
Ripple & Noise (Peak-Peak)         ≤ 40mV
Ripple & Noise (r.m.s)             ≤ 5mV
Set Accuracy                       ≤ 0.3% + 10mV
Transient Response Time (50%-100% rated Load)   ≤ 1.0ms

Constant Current

Load Regulation(90%-10% Rated Voltage)   ≤ 100mA
Line Regulation (198-264Vac)             ≤ 50mA
Ripple & Noise (Peak-Peak)               ≤ 100mAp-p
Set Accuracy                             ≤ 0.3% + 20mA
Size(width× height× depth)             120×55×240mm
Net Weight                               1.2KG